Panasonic SX-KN2400 ユーザーズマニュアル

Part XIII

MIDI

181

QQTG0692

Control Messages

Enable or disable the exchange of various control data.

1.

On the MIDI MENU display, select CONTROL
MESSAGES.

• The display looks similar to the following.
• The CONTROL MESSAGES display consists

of 3 pages. Use the PAGE buttons to switch
between pages.

2.

Use the MESSAGE 

▲ and ▼ buttons to select

the control message.

3.

Use the ON and OFF 

∧

 and 

∨

 buttons to spec-

ify on or off for the control message.

ON: 

Data for the control operation is exchanged.

OFF: 

Data for the control operation is not
exchanged.

• The BANK SELECT setting is effective only

when PRG. CHANGE is set to ON.

• The EFFECT & REVERB setting controls the

DIGITAL  EFFECT,  CHORUS,  MULTI and
REVERB on/off.

• RPN is the general term for KEY SHIFT,

TUNING, PITCH BEND RANGE and MODU-
LATION SENSITIVITY.

4.

Repeat steps 2 and 3 for each control as
desired.

Realtime Messages

Enable or disable the exchange of START/STOP data (REALTIME COMMANDS), and select the CLOCK
mode.

1.

On the MIDI MENU display, select REALTIME
MESSAGES.

• The display looks similar to the following.

2.

Use the buttons on the left side of the display
to select a function.

3.

Use the VALUE 

∧

 and 

∨

 buttons to change

the setting.

REALTIME COMMANDS

ON: 

Rhythm and SEQUENCER start/stop, con-
tinue, and song position pointer data can be
transmitted/received.

OFF: 

This data cannot be transmitted/received.

CLOCK

INTERNAL: 

This instrument’s internal clock is used to
control the perform-ance. The clock of the
connected equipment is disabled.

MIDI: 

The clock of the connected equipment is
used to control the performance. This
instrument’s clock is disabled. (The tempo
is displayed as “q = − − −.”)

• The CLOCK is set to INTERNAL when the

power to this instrument is turned on.

4.

Repeat steps 2 and 3 for the other function if
desired.

18_Part XIII.fm  181 ページ  ２００３年２月５日　水曜日　午後２時０分