Panasonic SX-KN2400 ユーザーズマニュアル
Part XIII
MIDI
182
QQTG0692
MI
DI
Common Setting
Set the functions which are common to all parts.
1.
On the MIDI MENU display, select COMMON
SETTING.
SETTING.
• The display looks similar to the following.
2.
Use
▲ and ▼ buttons to select the item.
NOTE ONLY:
Of the performance data, specify whether or
not only note data is exchanged.
not only note data is exchanged.
PROGRAM CHANGE TO P. MEM:
Enable or disable the exchange of program
change numbers for the RIGHT 1 part by
operation of the PANEL MEMORY buttons.
change numbers for the RIGHT 1 part by
operation of the PANEL MEMORY buttons.
• For this setting, the PANEL MEMORY 1 to 8
program change numbers correspond to the
bank numbers as follows:
BANK A = 0 to 7
BANK B = 8 to 15 ...
bank numbers as follows:
BANK A = 0 to 7
BANK B = 8 to 15 ...
INTRO, FILL-IN, ENDING:
Enable or disable the exchange of intro, fill-in
and ending data.
and ending data.
APC CONTROL:
Enable the exchange of data for the on/off sta-
tus of the AUTO PLAY CHORD’s BASIC,
ADVANCED and PIANIST modes.
tus of the AUTO PLAY CHORD’s BASIC,
ADVANCED and PIANIST modes.
FADE IN/OUT:
Specify whether or not FADE IN/OUT data is
exchanged.
exchanged.
PROGRAM CHANGE MODE
NX SOUND:
Program change numbers are standardized
among NX SOUND Technics models which
are set to this mode. The program change
number assigned to a given sound on one
model is assigned to the same sound on all
models which are set to the same mode.
among NX SOUND Technics models which
are set to this mode. The program change
number assigned to a given sound on one
model is assigned to the same sound on all
models which are set to the same mode.
PREVIOUS TECH:
Program change numbers are standardized
among non-NX SOUND Technics models
which are set to this mode. The program
change number assigned to a given sound
on one model is assigned to the same
sound on all models which are set to the
same mode.
among non-NX SOUND Technics models
which are set to this mode. The program
change number assigned to a given sound
on one model is assigned to the same
sound on all models which are set to the
same mode.
MAP R:
GS basic sounds are transmitted and
received as GS program change numbers.
received as GS program change numbers.
MAP Y:
XG basic sounds are transmitted and
received as XG program change numbers.
received as XG program change numbers.
∗
GS is a trademark of Roland Corporation. XG is a
trademark of Yamaha Corporation.
trademark of Yamaha Corporation.
DRUMS TYPE
NX SOUND:
Keyboard percussion instrument sounds
correspond to the same key note numbers
for connected NX SOUND Technics models
that are set to this type.
correspond to the same key note numbers
for connected NX SOUND Technics models
that are set to this type.
PREVIOUS TECH:
Keyboard percussion instrument sounds
correspond to the same key note numbers
for connected non-NX SOUND Technics
models that are set to this type.
correspond to the same key note numbers
for connected non-NX SOUND Technics
models that are set to this type.
SONG SELECT
ON:
Song number data can be exchanged.
OFF:
Song number data cannot be exchanged.
PREVIOUS MODEL MODE
ON:
INTRO, FILL IN, ENDING and APC CON-
TROL, FADE IN/OUT data are converted to
CONTROL CHANGE data for previous
models
TROL, FADE IN/OUT data are converted to
CONTROL CHANGE data for previous
models
∗ and then transmitted.
OFF:
The above settings are not converted.
∗ “Previous models” include all Technics instrument
models except for:
KN7000/6500/6000
PR604/804/603/703/903/1000
PR604/804/603/703/903/1000
3.
Use
∧
and
∨
buttons to change the setting.
4.
Repeat steps 2 and 3 for the other settings as
desired.
desired.
18_Part XIII.fm 182 ページ ２００３年３月６日 木曜日 午後１時３６分