JVC lt-20da6ssp ユーザーズマニュアル
- 16 -
number buttons) during recording, a message
appears asking if you want to stop recording
or not. Press OK button to stop recording or
BLUE button to continue recording.
Do not turn the TV off in the following cases:
When recording images from an external
Do not turn the TV off in the following cases:
When recording images from an external
device connected to TV (For example
camcorder).
When recording a TV channel after it has
been unscrambled on a decoder.
When recording a TV channel by using the
TVs output because the VCRs own tuner
can not properly receive that channel.
When recording Digital terrestrial broadcast-
ing (DVB-T).
TV autopower on/VCR image view:
When the VCR starts playing, the TV automati-
When the VCR starts playing, the TV automati-
cally turns on and images from EXT-2 appear
on the screen.
This function does not happen if your TVs main
This function does not happen if your TVs main
power is turned off. Set your TVs main power
to on (StandBy Mode).
Basic Operations
You can operate your TV using both the re-
mote control and TV buttons.
Operation with the buttons on the TV
Volume Setting
Press
Press
- button to decrease volume or
+ button to increase volume, so a vol-
ume level scale (slider) will be displayed at
the middle of the bottom on the screen.
Programme Selection
Press
Press
button to select the next pro-
gramme or
button to select the previ-
ous programme.
Switching input mode
Pressing TV/AV/OK button will change the
Pressing TV/AV/OK button will change the
input mode.
Entering Main Menu
Press MENU button to enter Main menu. In
Press MENU button to enter Main menu. In
the Main menu select submenu using
or
button and enter the sub-
menu using
- /
+ or TV/AV/OK or
MENU button. To learn the usage of the
menus, refer to the Menu System sections.
Operation with Remote Control
The remote control of your TV is designed to
control all the functions of the model you se-
lected. The functions will be described in ac-
cordance with the menu system of your TV.
Functions of the menu system are described
Functions of the menu system are described
in following sections.
Volume Setting
Press
Volume Setting
Press
+ button to increase volume.
Press
- button to decrease volume. A
volume level scale (slider) will be displayed in
the middle at the bottom of the screen.
Programme Selection (Previous or next
programme)
Press
Press
button to select the previous
programme.
Press
button to select the next
programme.
Programme Selection (direct access):
Press digit buttons on the remote control to
Press digit buttons on the remote control to
select programmes between 0 and 9. TV will
switch to the selected programme. To select
programmes between 10 - 99, press the digit
buttons consecutively which programme you
want to select (eg. for programme 27, first
press 2 and then 7). When it is late to press
second digit button only the first digit
programme will be displayed. The limit of the
delay time is 3 seconds.
Example: PR6 press 6, PR12 press 1
Example: PR6 press 6, PR12 press 1
and 2.
Press directly the programme number to
Press directly the programme number to
reselect single digit programmes.
Hint: The channel list numbers are assigned by the broad-
casters. Because not all channels are broadcast free-to-air
and stored by the receiver, the channel list numbers do not
run continuously. The fifteenth channel in the list, for ex-
ample, may not be channel number 15 but channel number
17.
Hint: If you enter a number which does not correspond to a
17.
Hint: If you enter a number which does not correspond to a
stored channel, the next valid channel number is selected
instead. If you enter a number greater than the highest
numbered channel in the channel list, the IDTV will select
the last channel in the list.
01-ENG-20710W-17MB16P-C1897S UK-(LT-20DA6SSP)-(TVAVOK)-IDTV-10042117-5008XXXX.p65
15.06.2006, 17:39
16