BMW serie 3 sport wagon 2002 ユーザーズマニュアル
67
n
Overview
Controls
Maintenance
Repairs
Data
Index
Check Control
Clock
The following information and/or condi-
tions are indicated using symbols,
starting with the ignition key in
position 2, until the condition has been
corrected.
tions are indicated using symbols,
starting with the ignition key in
position 2, until the condition has been
corrected.
1 Check the low beams and high
beams, as well as the parking lamps
2 Door open
3 Tailgate open
4 Check brake and tail lamps
When you open the driver's door after
parking, a signal sounds to remind you
if the headlamps have not been
switched off.
parking, a signal sounds to remind you
if the headlamps have not been
switched off.
If you wish to have a permanent time
display, you can make this setting in the
radio display (refer to the Radio
Owner's Manual).
display, you can make this setting in the
radio display (refer to the Radio
Owner's Manual).
You can set the clock and the time
display in the car radio as follows.
display in the car radio as follows.
Setting
With ignition key position 1 or 2 and
time displayed in the instrument cluster.
time displayed in the instrument cluster.
To set ahead: turn the button to the
right.
right.
To set back: turn the button to the left.
The adjustment speed will increase the
longer you continue to hold the button.
longer you continue to hold the button.
To change the display mode: press the
button briefly.
Every time you press the button, the
clock display alternates between the
12-hour or 24-hour mode.
button briefly.
Every time you press the button, the
clock display alternates between the
12-hour or 24-hour mode.
In ignition key position 0: the time is
displayed for a few seconds after you
press the left button, refer to
Odometer on page
displayed for a few seconds after you
press the left button, refer to
Odometer on page
Online Edition for Part No. 01 41 0 156 156 - © 09/01 BMW AG