Siemens TC63 ユーザーズマニュアル

s

TC63_ATC_V00.490

Page 405 of 501

5/24/05

Confidential / Draft - Do not copy

Is a display of the "real" 

 of the entry required? 

[0]

Do not show an entry's "real" location number. Parameter 

 will not

be displayed. 

1

Show the "real" location number as parameter 

 at the end of each

entry. 

String type phone number in format specified by 

.

The number parameter may be an empty string. 

Type of address octet, which defines the used type of number (ton) and the numbering plan identification (npi).

Please consider that for types other than 129 or 145 dialing from phonebook with 

 is, depending

on the network, not always possible (refer to GSM 04.08 subclause 10.5.4.7 for details). See also 

. 

Possible values are: 
145

Dialing string 

 includes international access code character '+' 

161

National number. Network support of this type is optional.

209

 has been saved as ASCII string and includes non-

digit characters other than "*", "#" or "+". Note that phonebook entries saved

with this type cannot be dialed. 

255

 is a command to control a Supplementary Service,

i.e. "*", "#" codes are contained. Network support of this type is optional. 

129

Otherwise

Text assigned to the phone number. The maximum length for this parameter is given in test command response

. 

Value indicating the number of used locations in selected memory storage. 

The location within phonebook memory at which the corresponding entry is located.

This location may be used for other commands (e.g. 

 or 

Maximum length of phone number for "normal" locations. Depending on the storage, a limited number of loca-

tions with extended memory is available per phonebook. Please refer to AT command 

 for detail. 

Maximum length of 

 assigned to the telephone number. The value indicated by the test command is

given in octets. If the 

 string is given in GSM characters, each character corresponds to one octet. If the

 string is given in UCS2, the maximum number of characters depends on the coding scheme used for

the alpha field of the SIM according to GSM 11.11, Annex B 

. In the worst case the number of UCS2 char-

acters is at least one less than half the number of GSM characters. 

<RealLocReq>

(num)

<number>

(str)

<type>

(num)

<text>

(str)(+CSCS)

<used>

(num)

<location>

(num)

<nlength>

(num)

<tlength>

(num)