Electrolux 506029 ユーザーズマニュアル
ENGLISH
15
Our appliances have been studied and optimized to give the highest performance. This appliance must be used exclusi-
vely for the purpose for which it has been designed, i.e. for washing pans with water and specific detergents. Any other
use will be considered “improper use” and will void the warranty and manufacturer liability.
vely for the purpose for which it has been designed, i.e. for washing pans with water and specific detergents. Any other
use will be considered “improper use” and will void the warranty and manufacturer liability.
This appliance will not carry out the rinse cycle should there be no supply water; it stops all functions and an error mes-
sage “A1” will be displayed (also see “Warning Messages Displayed On The Control Panel”).
sage “A1” will be displayed (also see “Warning Messages Displayed On The Control Panel”).
TIPS
•
Carry out a couple of cycles without pans to flush out any industrial grease which have remained in the tank
and piping.
and piping.
•
Avoid washing decorated pans.
•
Do not allow pots and pans to come into contact with other metals.
•
Do not allow food to dry on the pots and pans.
•
Remove large food scraps from the pots and pans to prevent clogging the filters.
•
Pre-wash the pots and pans by spraying them with cold or lukewarm water, do not use any detergent.
•
Use automatic dispensers for the detergent.
•
If there is no automatic dispenser, pour a non-foaming detergent into the tank when the water has reached the
washing temperature.
washing temperature.
CONTROL PANEL
Figure 12
The temperature shown on the display is that of the boiler if the indicator light “E” is on or of the tank if the light “D” is on.
The tank temperature is displayed during the wash cycle and the boiler temperature during the rinse cycle.
The tank temperature is displayed during the wash cycle and the boiler temperature during the rinse cycle.
D1
STARTING
•
Open the water supply shutoff valve.
•
Switch unit on at the main circuit breaker.
•
Open the door and check that all the components are
in their correct position.
in their correct position.
•
Close the door and press on/off “A” button.
The indicator light of the on/off button “A” (Figure 12)
comes on, indicating that the potwasher is powered and
that water is being introduced and heated. The word
“FILL” is shown on the display during the entire filling
and heating stage:
comes on, indicating that the potwasher is powered and
that water is being introduced and heated. The word
“FILL” is shown on the display during the entire filling
and heating stage:
D
USER INSTRUCTIONS
3
2
1
A
K
D
J
E
H
F
G
B
LEGEND:
A
A
= on/off
B
= drain/self-cleaning
cycle
K
= display
D
= “tank”
indicator
light
E
= “boiler” indicator light
J
=
wash
cycle
1
H
= wash
cycle
2
F
=
wash
cycle
3
G
= wash
cycle
infinite