Electrolux 506029 ユーザーズマニュアル

17

 Do not allow handles to protrude through 

bottom of rack, they may block wash and rinse arms 
rotation (Figure 15).

To wash lightweight pots and pans: 

-

unscrew the wing nut “X” (Figure 16);

-

push the relief valve “Y” (Figure 16) inwards to 
reduce pressure in the lower wash arm and increase 
it in the upper arm, so that the pots and pans remain 
in position;

-

retighten the wing nut “X” (Figure 16).

To wash large, heavy pots and pans: 

-

unscrew the wing nut “X” (Figure 16);

-

take out the relief valve “Y” (Figure 16);

-

retighten the wing nut “X” (Figure 16).

Close the door and select the suitable wash cycle; the 
corresponding indicator light comes on and the wash 
cycle starts:

- 

For lightly soiled pots and pans: press “J” button 
(Figure 12) (see table of times).

 (recommended)

For normally dirty pots and pans: press “H” button 
(Figure 12) (see table of times).

For very dirty pots and pans: press “F” button (Figure 12)
(see table of times).

For particularly dirty pots and pans with dried food resi-
due, pans with a special shape or for other specific 
needs of the user: press “G” button (Figure 12), which 
initiates a continuous wash until the operator selects an 
automatic cycle.

•

To stop the wash cycle, just press the selected cycle 
button or open the door.

•

To continue the wash cycle, just press the selected 
cycle button or close the door. The cycle starts again 
from where it stopped.

•

At the end of the wash, the potwasher emits a series 
of beeps and “END” blinks on the display:

lift the door and remove the rack containing the clean 
pans.

Y

X