Sharp R-216L ユーザーズマニュアル
16
Disconnect the power cord before cleaning or
leave the door open to inactivate the oven dur-
ing cleaning.
leave the door open to inactivate the oven dur-
ing cleaning.
Exterior
The outside surface is painted. Clean the outside with
mild soap and water. Then wipe with a clean damp-
ened cloth and polish dry with a soft cloth. Do not use
any type of household or abrasive cleaner.
mild soap and water. Then wipe with a clean damp-
ened cloth and polish dry with a soft cloth. Do not use
any type of household or abrasive cleaner.
Door
Wipe the window on both sides with a soft damp cloth
to remove any spills or spatters. Metal parts will be easier
to maintain if wiped frequently with a soft damp cloth.
Avoid the use of spray and other harsh cleaners as they
may stain, streak or dull the door surface.
to remove any spills or spatters. Metal parts will be easier
to maintain if wiped frequently with a soft damp cloth.
Avoid the use of spray and other harsh cleaners as they
may stain, streak or dull the door surface.
Touch Control Panel
Wipe the panel with a soft cloth dampened slightly with
water only. Dry with a soft cloth. Do not scrub or use
any sort of chemical cleaners. Close door and touch
STOP/CLEAR pad.
water only. Dry with a soft cloth. Do not scrub or use
any sort of chemical cleaners. Close door and touch
STOP/CLEAR pad.
Interior
Cleaning is easy because little heat is generated to the
interior surfaces; therefore, there is no baking and setting
of spills or spattering. To clean the interior surfaces, wipe
with a soft damp cloth. DO NOT USE ABRASIVE OR
HARSH CLEANERS OR SCOURING PADS. For heavier
soil, use baking soda or a mild soap; wipe clean with a soft
damp cloth. NEVER SPRAY OVEN CLEANERS DI-
RECTLY ONTO ANY PART OF THE OVEN.
interior surfaces; therefore, there is no baking and setting
of spills or spattering. To clean the interior surfaces, wipe
with a soft damp cloth. DO NOT USE ABRASIVE OR
HARSH CLEANERS OR SCOURING PADS. For heavier
soil, use baking soda or a mild soap; wipe clean with a soft
damp cloth. NEVER SPRAY OVEN CLEANERS DI-
RECTLY ONTO ANY PART OF THE OVEN.
Waveguide Cover
The waveguide cover is made from mica so requires spe-
cial care. Keep the waveguide cover clean to assure good
oven performance. Carefully wipe with a soft damp cloth
any food spatters from the surface of the cover immediately
after they occur. Built-up splashes may overheat and cause
smoke or possibly catch fire. Do not remove the waveguide
cover.
cial care. Keep the waveguide cover clean to assure good
oven performance. Carefully wipe with a soft damp cloth
any food spatters from the surface of the cover immediately
after they occur. Built-up splashes may overheat and cause
smoke or possibly catch fire. Do not remove the waveguide
cover.
Odor Removal
Occasionally, a cooking odor may remain in the oven.
To remove, combine 1 cup/250 ml water, peel and juice
of 1 lemon and several whole cloves in a 2-cup/500 ml
glass measuring cup. Boil for several minutes using
100% power. Allow to set in oven until cool. Wipe inte-
rior with a soft cloth.
To remove, combine 1 cup/250 ml water, peel and juice
of 1 lemon and several whole cloves in a 2-cup/500 ml
glass measuring cup. Boil for several minutes using
100% power. Allow to set in oven until cool. Wipe inte-
rior with a soft cloth.
Turntable / Turntable Support
The turntable and turntable support can be removed
for easy cleaning. Wash them in mild, sudsy water; for
stubborn stains use a mild cleanser and a non-abra-
sive scouring sponge. They are also dishwasher-proof.
The turntable motor shaft is not sealed, so excess wa-
ter or spills should be wiped up immediately.
for easy cleaning. Wash them in mild, sudsy water; for
stubborn stains use a mild cleanser and a non-abra-
sive scouring sponge. They are also dishwasher-proof.
The turntable motor shaft is not sealed, so excess wa-
ter or spills should be wiped up immediately.
C L E A N I N G A N D C A R E
Exterior
Interior
Turntable
Turntable Support