TP-LINK TL-WR2543ND ユーザーズマニュアル

 

- 9 - 

This chapter will show you how to configure the basic functions of your  450Mbps Dual-Band 

Wireless N Gigabit Router using Quick Setup Wizard within minutes. 

The default domain name of the Router is 

 and the default Subnet Mask is 

255.255.255.0. These values can be changed as you desire. In this guide, we use all the default 

values for description. 

Connect the local PC to the LAN ports of the Router and then you can configure the IP address for 

your PC by the following method: Set up the TCP/IP Protocol in "Obtain an IP address 

automatically" mode on your PC. If you need instructions as to how to do this, please refer to 

 Then the built-in DHCP server will assign IP address for the 

PC. 

Now, you can run the Ping command in the command prompt to verify the network connection 

between your PC and the Router. The following example is in Windows 2000 OS. 

Open a command prompt, and type ping 192.168.0.1, and then press Enter. 

¾

  If the result displayed is similar to the Figure 3-1, it means the connection between your PC 

and the Router has been established well.   

 

Figure 3-1    Success result of Ping command