TP-LINK TL-WR2543ND ユーザーズマニュアル

 

- 33 - 

Choose menu “Network  → MAC Clone”, you can configure the MAC address of the WAN on 

the screen below, Figure 4-14: 

 

Figure 4-14  MAC Address Clone

 

Some ISPs require that you register the MAC Address of your adapter. Changes are rarely 

needed here. 

¾

 

WAN MAC Address - This field displays the current MAC address of the WAN port. If your 

ISP requires you to register the MAC address, please enter the correct MAC address into 

this field in XX-XX-XX-XX-XX-XX format (X is any hexadecimal digit).   

¾

 

Your PC's MAC Address - This field displays the MAC address of the PC that is managing 

the Router. If the MAC address is required, you can click the Clone MAC Address button 

and this MAC address will fill in the WAN MAC Address field. 

Click  Restore Factory MAC to restore the MAC address of WAN port to the factory default 

value. 

Click the Save button to save your settings. 

)

Note:   

Only the PC on your LAN can use the MAC Clone function. 
 

Choose menu “Network  → LAN”, you can configure the IP parameters of the LAN on the screen 
as below. 

 

Figure 4-13  LAN