Sharp FO-DC535 ユーザーズマニュアル

Optional Settings

7. Optional 

Settings

Setting 28: DISTINCTIVE RING
This sets the ring pattern to which your fax will answer if you subscribe to a 

distinctive ring service. Press 

 or 

 to select a ring pattern and then 

press 

. See page 199 for more details.

♦

Initial setting: OFF

Setting 29: VERIFICATION STAMP
Select ON if you want the machine to stamp each original document page as 
it is scanned. After scanning, you can check to see if all pages have been 
stamped to verify that no double feeds occurred. Select OFF to turn the 

function off. Press 

 or 

 to make the selection and then press 

.

Note: To use this function, your dealer must install the Verification Stamp 
option.

♦

Initial setting: OFF

Setting 30: DEFAULT COPY RESOLUTION
Use this setting to select the default copying resolution (the resolution used for 

copying if a setting is not made with 

). 

Press  

or  

to 

select 

STANDARD, FINE, SUPER FINE, or ULTRA FINE, and then press 

.

♦

Initial setting: FINE

Setting 31: SEPARATE MODE
If desired, you can have the machine draw a sheet of paper from one of the 
paper sources after each fax reception (and after each print job if the network 
printer option is installed). By loading colored (or large) paper in that source, 
each colored sheet drawn will act as a separator that makes it easy to 
distinguish where one multi-page document ends and another begins. A 
Transaction Report printed after a fax reception will also be printed from that 

paper source to act as a separator sheet. To turn on this function, press 

 

or 

 to select YES, select the paper source for the separator paper, and 

then press 

. After turning on the function, be sure to load appropriate 

paper in the selected paper source. To turn off Seperate mode, press 

 or