Sanyo sanups e11a102a ユーザーズマニュアル
− 19 −
EXT.
BATT
BATT
MAIN SW
9. Operating Procedures
9.1 UPS Startup (Normal Operation)
Check that the INPUT indicator has
changed from blinking to lit, and then
proceed to step ②.
proceed to step ②.
・
The green LOADLEVEL 25 to 100% indicators and the red LOADLEVEL O.L indicator light
according to the load connected to the UPS.
・
The green ECONOMY indicator lights when the UPS operating mode is Economy Mode.
・
The green DOUBLE CONVERSION indicator when the UPS operating mode is Double
Conversion Mode.
Conversion Mode.
・
When the green DOUBLE CONVERSION indicator and the green ECONOMY indicator are both
off, the UPS is in Active Filter Mode.
off, the UPS is in Active Filter Mode.
This manual uses a frame to indicate switches. (Example: INV.ON/STAND BY ).
It also describes the color of the LED whenever it refers to an indicator on the control panel.
(Examples: Green INV.ON/STAND BY, red ALARM)
It also describes the color of the LED whenever it refers to an indicator on the control panel.
(Examples: Green INV.ON/STAND BY, red ALARM)
Hold for 1 second.
Buzzer
Musical trill
LEDs
Green INPUT
Lit
Green INV.ON/STAND BY Lit
Green OUTPUT
Lit
②
Press and hold
for one second.
①
Set MAIN SW on the back panel of the UPS to “ON”.
LEDs
Green INPUT
Blinking
Green INV.ON/STAND BY
Off
Green OUTPUT
Off
↓
Green INPUT
Lit
Green INV.ON/STAND BY Off
Green OUTPUT
Off
①
Set to “ON”.
Indicates a lit LED
In the illustrations in this manual
Indicates a blinking LED