Patton electronic forefront 2616rc ユーザーズマニュアル

Cable installation

Model 2616RC T-DAC User Manual 

Figure 6. Ethernet RJ-45 pin and signal definitions for T-DAC

The 10/100Base-T Ethernet port can connect to a single Ethernet-capable workstation or PC by means of a 
cross over cable. Refer to 

 to assemble a cross-connect cable that will connect between the NIC Ether-

net port in the workstation and the T-DAC 10/100Base-T Ethernet port.

Figure 7. Cross-over RJ-45-to-RJ-45 Ethernet cable diagram

Install the supplied RJ-45-to-RJ-45 cable with the DB9-RJ45 adapter between the T-DAC RS-232 port (see 

 on page 22) and an open serial port on your computer. If you need to assemble your own cable, refer 

to the pinout diagram in 

.

Figure 8. 

DB-9-to-RJ-45 cable

 diagram