Philips horizon mcs 130 surround ユーザーズマニュアル

19

You can store up to a total of 50 radio stations.

Press the ® key on the remote control for
about 3 seconds.

is displayed and all

the available stations are programmed
(overriding all former programmed radio
stations).The system will store first the RDS
stations with a strong enough signal, then the
RDS stations with a weaker signal and finally
the non RDS stations.
Note:
- to stop the automatic installation, press the ‡

&

Briefly press the ® key on the remote control.
The current station number starts flashing and
the station name, in case of a RDS station, or
the tuned frequency is displayed.

é

Hold down the Ò or † key to start the
search for a new radio station.The search will
stop on the next radio station and display the
tuned frequency which will eventually be
replaced by the detected RDS name.
Note: briefly and repeatedly press the Ò or †
key to fine tune the frequency if necessary.

é

Use the 

or 

key or the digit keys to select

the station number where you want to store
the new radio station.

‘

Press the ® key to store the new radio
station on the selected station number.

(

Repeat 

&

to 

‘

to store another radio

station.

Note: To stop the manually installation, press the ‡
key. Nothing is stored and everything is restored to
the radio status just before entering the manual
installation mode.

&

Select the station number of the radio station
you want to assign a name (for stations without
RDS reception) or to change the name.

é

Press and hold the b key on the remote
control for about 3 seconds.The cursor flashes
on the first of 8 characters.

“

Press the cursor up/down to change the
character.

‘

Press the 

key to confirm the new name.

- Press and hold the ‡ key for about 3 seconds.
- the message 

2229.1 gb   12-03-2003  09:55  Pagina 19