Philips mcd280-21m ユーザーズマニュアル

20

Allows you to select the color system matching
the connected TV set.

– If the connected TV is NTSC system, select
this mode. It will change the video signal of a PAL
disc and output in NTSC format.

– If the connected TV is PAL system, select this
mode. It will change the video signal of a NTSC
disc and output in PAL format.

– If the connected TV is multi system, select this
mode.The output format will be in accordance
with the video signal of the disc.

– Video out selection enables you to choose
the type of video output suitable for your DVD
system.

– Select S-VIDEO if you have connected the
S-VIDEO output to your TV using S-VIDEO jack.

–   Select Pr/Cr Pb/Cb Y if you have
connected the video output to your TV using Pr/
Cr Pb/Cb Y jack.

Press SYSTEM MENU.

Press 2;.

Select the aspect ratio of the TV to be connected.

4:3 PS (Pan and Scan mode )
– If you have a conventional TV set and your
DVD is not formatted for widescreen viewing, use
this setting.  A wide picture is displayed on the
whole TV screen with a portion automatically cut
off.

        

4:3 LB (Letterbox mode )
– If you have a conventional TV set and your
DVD is formatted for widescreen viewing, use this
setting.  A wide picture with bands displayed on
the upper and lower portions of the TV screen.

              

16:9 (Wide screen mode)
– If you have a widescreen TV set, use this
setting (you must also set your widescreen TV to
“full size”) available on a disc, then the disc’s own
preference will be used.