Philips VR1000 ユーザーズマニュアル
— 16 —
S
ETTING
U
P
(C
ONTINUED
)
Manual Channel Setting
When you want to do channel setting
manually, perform the following
procedures as required.
• If you want to ..........
manually, perform the following
procedures as required.
• If you want to ..........
.......... add channels (See below)
.......... delete unwanted channels
.......... delete unwanted channels
(See next column)
.......... change the channel
positions (See next
column)
column)
.......... perform fine-tuning (See
page 17)
.......... descramble programmes
when receiving scrambled
broadcasts (See page 17)
broadcasts (See page 17)
.......... change station names (See
page 17)
If you want to add channels
1
Access Programmed Channel
Information List
Information List
1 Press
MENU
.
2 Press
5 or ∞ to select “MANUAL
CH SET”, then press OK or 4.
2
Select Channel Position
1 Press
5∞ 23 until a vacant
position in which you want to store a
channel begins blinking.
channel begins blinking.
2 Press OK. The Manual Channel Set
screen appears.
5
5
5
The blueback screen and the
programme currently being
broadcasted by the selected channel
appear alternately for 8 seconds each.
programme currently being
broadcasted by the selected channel
appear alternately for 8 seconds each.
PR
CH
ID
PR
CH
ID
01
26
BBC1
08
– – – –
02
33
BBC2
09
– – – –
03
23
ITV
10
– – – –
04
30
CH4
11
– – – –
05
37
CH5
12
– – – –
06
– – – – 13
– – – –
07
– – – – 14
– – – –
[
5∞
]
=
: EDIT
= [CLEAR] : DELETE
[MENU] : EXIT
If you want to delete
unwanted channels
unwanted channels
You can delete channels manually.
1 Press
MENU
.
2 Press
5 or ∞ to select “MANUAL
CH SET” then press
OK
or
3.
The programmed channel informa-
tion list appears.
tion list appears.
3 Press
5 or ∞ until the item you want
to delete begins blinking.
4 Press CLEAR to delete.
The item directly beneath the
cancelled one moves up one line.
cancelled one moves up one line.
5 Press MENU to exit from the menu
operations.
If you want to change the
channel positions
channel positions
You can also replace the channel
position numbers.
position numbers.
1 Press MENU.
2 Press
2 Press
5 or ∞ to select “MANUAL
CH SET” then press
OK
or
3.
3 Press
5 or ∞ until the item you want
to change begins blinking, then press
OK
.
4 Press
5 or ∞ to move the station to
the new channel position then press
OK
.
Example: If you moved the station in
position 4 to position 2, the stations
originally in positions 2 and 3 each
move down one space.
position 4 to position 2, the stations
originally in positions 2 and 3 each
move down one space.
5 Press
MENU
to exit from the menu
operations.
3
Set New Channel Information
1 Press
5 or ∞ to change the band
between CH (regular) and CC
(cable), then press
(cable), then press
3.
2 Press the Number buttons to input
the channel you want to store.
• Input “0” before any single number
• Input “0” before any single number
entries.
• To input the registered station name
(ID – ✈P.18), press
3 until “----”
(ID setting) begins blinking, then
press
press
5 or ∞.
• For fine tuning adjustment, press
3
until “+/–” begins blinking, then
press
press
5 or ∞. While tuning, “+” or
“–” appears.
• When storing a channel that sends
scrambled broadcasts, press
3 until
“OFF” (Decoder setting) blinks,
then press
then press
5 or ∞ to set DE-
CODER” to “ON” (“OFF” is the
default setting).
When “AV2 SELECT” is set to
“AV2” or “SAT”, the “DECODER”
setting cannot be changed (✈P.27).
default setting).
When “AV2 SELECT” is set to
“AV2” or “SAT”, the “DECODER”
setting cannot be changed (✈P.27).
The blueback screen and the
programme currently being broadcast-
ed by the selected channel appear
alternately for 8 seconds each.
programme currently being broadcast-
ed by the selected channel appear
alternately for 8 seconds each.
PR CH
ID
FINE DECODER
06 CH01 – – – – +/–
OFF
[
5∞
] : SELECT
[
] : CURSOR
+=
: OK
[MENU] : EXIT
∞
∞
VR1000/07-New
99.7.8, 3:30 PM
16