Philips VR1000 ユーザーズマニュアル
— 17 —
If you want to descramble
programmes when receiving
scrambled broadcasts
programmes when receiving
scrambled broadcasts
When you can receive a scrambled
broadcast, you can descramble the
programme by connecting this VCR to
an external decoder through the VCR’s
AV2 IN/DECODER connector.
Complete the connection described on
page 34 and follow the instructions
below;
broadcast, you can descramble the
programme by connecting this VCR to
an external decoder through the VCR’s
AV2 IN/DECODER connector.
Complete the connection described on
page 34 and follow the instructions
below;
1 Press
MENU
to access main menu
screen.
2 Press
5 or ∞ to select “MODE
SET”, then press
OK
or
3.
The mode set screen appears.
3 Press
5 or ∞ to select “AV2
SELECT”.
4 Press
OK
or
3 to select “DE-
CODER” then press MENU to exit.
5 Press
MENU
again to access the
main menu.
6 Press
5 or ∞ to select “MANUAL
CH SET”, then press
OK
or
3.
The programmed channel informa-
tion list appears.
tion list appears.
7 Press
5 ∞ 23 to select the
channel position broadcasting
scrambled programmes, then press
scrambled programmes, then press
OK
twice. The Manual Channel Set
screen appears.
8 Press
3 until “OFF” (Decoder
setting) begins blinking, and set it to
“ON” by pressing
“ON” by pressing
5 or ∞.
9 Press
OK
. The programmed channel
information list appears.
10 Press
MENU
.
If you want to perform fine-
tuning
tuning
Fine-tuning is performed automatically
during Auto Channel Set, but you can
also perform fine-tuning manually.
during Auto Channel Set, but you can
also perform fine-tuning manually.
1 Press
MENU
.
2 Press
5 or ∞ to select “MANUAL
CH SET”, then press
OK
or
3.
3 Press
5∞ 23 until the item you
want to tune begins blinking. Press
OK
twice. The Manual Channel Set
screen appears.
4 Press
3 until “+/–” begins blinking,
then press
5 or ∞ until the picture is
clearest.
5 Press
OK
. The programmed channel
list appears.
6 Press
MENU
to exit the menu
operations.
If you want to change station
names
names
You can also change the station name
manually.
manually.
1 Press
MENU
.
2 Press to select “MANUAL CH
SET”, then press
OK
or
3.
3 Press
5∞ 23 until the item you
want begins blinking.
4 Press
OK
twice. The Manual
Channel Set screen appears.
5 If you want to change the station
name to registered one (P.18), press
3 until the station name (ID) begins
blinking, then press
blinking, then press
5 or ∞ until the
new station name (ID) appears.
If you want to change the station
name to other than registered one,
press
name to other than registered one,
press
3 until the first letter of the
station name (ID) begins blinking,
then press
then press
5 or ∞ to cycle through
the characters (A–Z, 0–9, –, *, +, _
(space) and stop when the desired
character is indicated, then press
(space) and stop when the desired
character is indicated, then press
3
to enter. Enter the remaining
characters the same way (maximum
of 4).
• If you make a mistake, press
characters the same way (maximum
of 4).
• If you make a mistake, press
2
until the incorrect character begins
blinking. Then enter the correct
character by pressing
blinking. Then enter the correct
character by pressing
5 or ∞.
6 Press
OK
. The programmed channel
list appears.
7 Press
MENU
to exit menu opera-
tions.
MODE SET
PREVIOUS PAGE
AV1 SELECT VIDEO
AV1 SELECT VIDEO
AV2 SELECT AV2
[
5∞] =
[MENU] : EXIT
ATTENTION
• If the channel positions are changed
or deleted, the Guide Programme
numbers that have been set are reset
or changed. If an attempt is made at
timer programming with
numbers that have been set are reset
or changed. If an attempt is made at
timer programming with
VIDEO
Plus+ system
in this state, the
“GUIDE PROG SET” screen
appears. Input the channel position on
which the broadcast for the
appears. Input the channel position on
which the broadcast for the
PlusCode
number is received.
• If the channels are added, set the
Guide Programme number for that
channel (station). (✈“VIDEO Plus+
Set Up” on page 20)
channel (station). (✈“VIDEO Plus+
Set Up” on page 20)
VR1000/07-New 99.10.15, 5:41 PM
17