Manualsbrain.com
  1. マニュアル
  2. ブランド
  3. Philips
  4. vr210
  5. ユーザーズマニュアル

Philips vr210 ユーザーズマニュアル

ダウンロード
ページ / 20
— 12 —
B
ASIS
 
O
PERATIONS
To stop recording
Press 
STOP
 
7.
To watch another TV
programme while recording
Select a different channel you want to
watch on the TV.
You can watch the programme of the
selected channel on the TV, without
affecting recording on the VCR.
Erase protection
Cassettes have the record tab to ensure
that recordings are not accidentally
erased.
To prevent accidental erasure:
Break off the record tab with a
screwdriver.
To record again:
Cover the opening with
adhesive tape.
Adhesive tape
Playback
Make sure....
• Your VCR, TV and antenna are
connected correctly.
• The remote control operation mode
is set correctly for operating your
target component.
– Press 
VCR
 to operate the VCR.
– Press 
TV
 to operate the TV.
• The correct colour mode is selected.
(✈P.11)
1
On TV
1 Turn on the TV.
2 Select the video channel (or external
video input).
2
On VCR
Insert a cassette.
The VCR turns on.
• If the record tab on a cassette is removed,
playback will start automatically.
• If a cassette is already in the VCR, turn
on the VCR.
3
Start Playback
Press 
PLAY
 
3.
To rapidly locate a particular scene
Press 
FF
 
¡ or 
REW
 
1 during
playback. (No sound comes out.)
To resume playback, press 
PLAY
 
3
again.
• If 
FF
 
¡ or 
REW
 
1 is held down for
more than 2 seconds, simply releasing it
will cancel the search.
To stop playback
Press 
STOP
 
7.
To rewind the tape
Press 
REW
 
1 when the tape is not
running.
To fast forward the tape
Press 
FF
 
¡ when the tape is not
running.
To eject the tape
Press 
EJECT
 
0.
To turn off the VCR
Press 
POWER
.
When playing back an NTSC tape on a
PAL TV
• Some TVs shrink the picture vertically
and place black bars at the top and the
bottom of the TV screen.
• The time counter and remaining tape
length will not be correct.
Recording
When using this VCR, an index mark is
always marked at the beginning of
every recording. This index marks
make it easier for you to search for the
beginning of the recordings.
Make sure....
• The record tab on the cassette is not
removed.
• Your VCR, TV and antenna are
connected correctly.
• The remote control operation mode
is set correctly for operating your
target component.
– Press 
VCR
 to operate the VCR.
– Press 
TV
 to operate the TV.
• The correct colour mode is selected.
(✈P.11)
1
On TV
1 Turn on the TV.
2 Select the video channel (or external
video input).
2
On VCR
Insert a cassette with the record tab in
place.
The VCR turns on.
• If a cassette is already in the VCR, turn
on the VCR.
To rewind the tape, press 
REW
 
1.
3 
Select Tape Speed
Press 
ALT/ SPEED
 until the desired
tape speed SP, LP or SLP appears on
the display.
SP, LP : For PAL signal
SP, SLP: For NTSC signal
4
Select a Channel
Press 
CH
 
5 / ∞ or 
Number
 buttons  to
select the channel to record.
5
Start Recording
Press 
REC/OTR
.
To pause recording
Press 
STILL/SLOW
 
 briefly (or
STILL/PAUSE
 
8 on the front panel).
To resume recording, press the same
button again.
Automatic Operations
Auto playback
When a tape is inserted, the VCR turns
on. If the record tab is removed,
playback begins.
Auto rewind
When a tape reaches its end during
playback, fast forwarding or manual
recording, the VCR rewinds the tape
and stops.
Memory rewind power off
When you press 
POWER
 during
rewinding, the VCR turns off after
rewinding is completed.
Eject cassette
You can eject the tape simply by
pressing 
EJECT
 
0 even while the
VCR is turned off.
When you press 
EJECT
 
0, the VCR
automatically turns on, ejects the tape,
then turns off.
vr210/410/55
00.3.6, 1:09 PM
12