Philips vr210 ユーザーズマニュアル

Each time a tape is inserted, auto
tracking starts working and
continuously analyses the signal to
adjust for optimum picture quality
during playback. So, there is no need
for you to minimize noises in most
tapes during playback.

• During normal playback:

If auto tracking cannot eliminate
noises well during playback, press

CH

 

5 or ∞.

• During a slow motion picture:

Press 

CH

 

5 or ∞ to minimize noises

in the slow motion picture.

• During a still picture:

Press 

CH

 

5 or ∞ to reduce jitter

inthe still picture.

To cancel manual tracking, stop the
tape, eject the tape, then re-insert it.

5 /∞  button,

5 /∞),

this indicates that your video heads
are dirty. (✈P.20)

Are you familiar with tape playback?
If so, you are ready to enjoy the special
effect playback features described
below.

Press 

SKIP SEARCH 

during playback

to search forward for 30 seconds by the
time counter reading.
Each time you press the button, the
search time increases as follows:

 

30

=

60

=

90

=

120 sec.

The VCR automatically resumes
normal playback after searching for the
specified period.

Press 

STILL/SLOW 

 briefly (or

STILL/PAUSE

 

8 on the front panel)

during playback.
Playback is freezed and a still picture
appears.
Press the 

STILL/SLOW 

 button

repeatedly to advance the still picture
frame by frame.

To advance a still picture:
Press 

STILL/SLOW 

 or 

STILL/

PAUSE

 

8 again. Each time a button is

pressed, a still picture advance one
frame.

To resume playback, press 

PLAY

 

3.

Press 

STILL/SLOW 

 (or 

STILL/

PAUSE

 

8 on the front panel) for more

than 2 seconds during playback.

To decrease the slow motion speed
(and reverse the slow motion
playback), press 

STILL/SLOW 

 –.

To increase the slow motion speed
(and forward the slow motion
playback), press 

STILL/SLOW 

 +.

To resume playback, press 

PLAY

 

3.

This function enables you to search
forward to the next unrecorded portion
of the tape (or to the point at which
recording was stopped).

1 Press the 

REC END SEARCH

button. The VCR begins fast
forwarding or rewinding to find the
blank portion or the recording end
portion on the tape.

SEARCHING

FOR REC END

 will appear on the

screen during the search.

2 The VCR automatically stop when

the blank portion or the recording
end portion is reached. 

REC END

SEARCH COMPLETED

 will

appear on the screen briefly.

    The tape remaining tape time also

appears on the display panel.

When you press and hold 

PLAY

 

3 for

more than 5 seconds, you can play back
the same tape repeatedly (100 times).
When the tape runs to its end, the VCR
automatically rewinds the tape, and
starts playback.

You can prevent the VCR operations.

When the VCR is turned on, press and
hold 

POWER

 on the remote control

for more than 10 seconds to turn off the
VCR.
The “CL” appears blinking on the
display.
While “CL” is on the display, you
cannot turn on the VCR by pressing

POWER

 on the VCR.

Press and hold 

POWER

 on the remote

control for more than 10 seconds to
turn on the VCR.
The “CL” disappears on the display
and VCR is turned on.

You can locate an index marked at the
beginning of each recording on a tape
recorded on this VCR (or an indexed
tape).
Press 

¢ or 4 repeatedly until the

appropriate number is displayed on the
TV screen before starting play.
Rapid forward or reverse search begins.
When it finds the designated index,
playback starts automatically.

• Locate an index number by pressing the

button repeatedly, indicating how many
index marks ahead of or behind that
recording you want is from the tape’s
current position.

• Up to ±9th index mark from the current

position on the tape can be located.

vr210/410/55

00.3.6, 1:09 PM

13