Philips VRKD12BL ユーザーズマニュアル

POWER

A velcro strip is supplied. Peel off the tape backing, then stick
one piece of the velcro to the front of the VCR and one piece
to the top of the clock as shown in the picture at right. Make
sure the velcro pieces will touch when the alarm clock is in
place in the holder.

Set the alarm clock in the clock holder.

POWER

Remove the battery compartment lid on the back of the
alarm clock. Use your finger or fingernail to flip down the lid.

Insert one AA battery inside the battery compartment with 
its + and – ends placed as shown in the picture at right.

Set the OFF/ON switch to ON. At the proper time, the
alarm will sound. The alarm will sound until you move the
OFF/ON switch to OFF.

•  Set the VCR’s internal clock for a timer recording or One-

Touch Recording. Details are on pages 14-15.

•  When you do not use the alarm, set the OFF/ON switch on

the back of the alarm clock to OFF.

• The alarm will sound in the next 12-hour period. The alarm

clock does not have AM or PM settings.

• The alarm sound is a beep. The bells on the top of the clock

are for appearance only. The bells will not ring.

(on the right

as you look

at the back

of the clock)

(on the left

as you look

at the back

of the clock)

Velcro on

front of VCR

Alarm clock placed 

correctly on alarm

clock holder

Velcro on

back of clock

Alarm clock

holder

Pop the three slots of the alarm clock holder into the three
holes on the left side of the front of the VCR. The holder will
curve down, like a bowl, when placed correctly.