Maytag mde-mdg21pra ユーザーズマニュアル

©2004 Maytag Appliances Company

16022904  Rev. 0

37

To avoid risk of electrical shock, personal injury or death;
disconnect power to unit before servicing.

1. Disconnect  power supply to unit.
2. Remove top two screws.

3. Carefully lay control Panel forward.

1. Disconnect power supply to unit.
2. Remove Control Panel.
3. Disconnect wiring harness connectors.

Observe the positions of the harness connectors

plugged into the control board.

4. Remove four nuts holding the Microprocessor Board to

the standoff studs.

5.  Disconnect Ribbon connector to Touch Pad.

!.

Disconnect power supply to unit.

2. Remove the screws securing the Facia.
3. Remove  Microprocessor Board.
4. Disconnect ribbon connector.
5. Remove screws securing Touch Pad Assembly to

Control Panel.

1. Disconnect  power to supply to unit.
2. Remove Control Panel.
3. Disconnect  wiring harness connection.
4. Remove screws securing Transformer  in place.

1. Disconnect power supply to unit.
2. Remove Service Access Door and Coin box.

3. Remove two 9/16” hex nuts securing Meter Case.
4. Remove Control Panel.
5. Remove 1/4” hex head screws hold Meter Case to the

Console.

6. Disconnect wires for Service & Vault  Switch and

connector for the Coin Drop Sensor.

7. Lift Meter Case off the Top Cover.