Maytag mde-mdg21pra ユーザーズマニュアル

38

16022904 Rev. 0

©2004 Maytag Appliances Company

To avoid risk of electrical shock, personal injury or death;
disconnect power to unit before servicing.

1. Disconnect power supply to unit.

1.  Disconnect power supply to unit.
2. Remove Coin Acceptor.
3. Remove screw securing Coin Sensor to the rear of the

Coin Drop Acceptor.

1. Disconnect power supply to unit.
2. Open the door and remove the center screw of each

hinge secured to the inner flange of the front panel in
the door opening.

3. Grasp the door with both hands and lift the door in the

hinge area and draw the door assembly away from
the machine.  This will disengage the hinges from the
slots in the front shroud.

5. Disconnect wiring harness for Coin Sensor.
6. Remove Coin Drop Acceptor

1.  Disconnect power supply to unit.
2.  Remove service access door and coin box.
3. Disconnect wires from the switch.
4.  Squeeze the two tabs on the switch and push the

switch through towards the front.

4.  Disconnect wires from the switch, and squeeze tabs

on switch to remove from bracket.

1.  Disconnect power supply to unit.
2.  Remove service access door.
3.  Remove the screw securing the switch mounting

bracket and lift the switch from inside the meter case.

2.  Unlock service access door.
3.  Loosen the two locking bolts from inside the meter

case.

4. Remove Control Panel.