Garmin gpsmap 5212 ユーザーズマニュアル
2
GPSMAP 5000 Series Owner’s Manual
Getting Started
G
ettin
G
S
tarted
Turning the Chartplotter On
Note: The first time you power on your chartplotter, you must go through a setup sequence. See
“
”.
1. Press and release the
Power
key. After a few moments, the Warning screen appears.
Warning Screen
Home Screen
2. Touch
I Agree
to open the Home screen.
Turning the Chartplotter Off
To turn the chartplotter off, press and hold the
Power
key.
Initializing Chartplotter Settings
The first time you turn your chartplotter on, you must configure a series of initial settings. These
settings must also be configured when restoring factory settings (
). All of these settings can be
The initial settings are as follows:
Language—touch the language that you want shown on your screen.
Welcome—touch
Welcome—touch
oK
.
Position Format—specify the coordinate system to use for location readings.
time Format—select 12-hour, 24-hour, or UtC (Universal Time Code) to specify the format
time Format—select 12-hour, 24-hour, or UtC (Universal Time Code) to specify the format
in which time is displayed.
time Zone—select your time zone.
Units—select Statute, Metric, or Nautical to specify units for on-screen measurements.
Minimum Safe Depth—specify the minimum safe depth for your boat. Refer to your boat
time Zone—select your time zone.
Units—select Statute, Metric, or Nautical to specify units for on-screen measurements.
Minimum Safe Depth—specify the minimum safe depth for your boat. Refer to your boat
specifications for more information.
Minimum overhead Clearance—specify the minimum overhead clearance for your boat. Refer
Minimum overhead Clearance—specify the minimum overhead clearance for your boat. Refer
to your boat specifications for more information.
•
•
•
•
•
•
•
•
•
•
•
•
•