bobcat s205 ユーザーズマニュアル
S205 Skid-Steer Loader
Operation & Maintenance Manual
Operation & Maintenance Manual
86
Figure 154
Connect the end of the first cable (1) [Figure 154] to the
positive (+) terminal of the booster battery. Connect the
other end of the same cable (2) [Figure 154] to the
positive terminal on the loader starter.
positive (+) terminal of the booster battery. Connect the
other end of the same cable (2) [Figure 154] to the
positive terminal on the loader starter.
Connect the end of the second cable (3) [Figure 154] to
the negative (-) terminal of the booster battery. Connect
the other end of the same cable (4) [Figure 154] to the
engine.
the negative (-) terminal of the booster battery. Connect
the other end of the same cable (4) [Figure 154] to the
engine.
Keep cables away from moving parts. Start the engine.
(See STARTING THE ENGINE on Page 29.)
(See STARTING THE ENGINE on Page 29.)
After the engine has started, remove the ground (-)
cable (4) [Figure 154] first.
cable (4) [Figure 154] first.
Remove the cable from the positive (+) terminal (2)
[Figure 154].
[Figure 154].
IMPORTANT
Damage to the alternator can occur if:
•
•
Engine is operated with battery cables
disconnected.
disconnected.
•
Battery cables are connected when using a fast
charger or when welding on the loader. (Remove
both cables from the battery.)
charger or when welding on the loader. (Remove
both cables from the battery.)
•
Extra battery cables (booster cables) are
connected wrong.
connected wrong.
I-2023-1285
P-31860
1
3
4
2