Mitel 3300 ユーザーズマニュアル

 

7/4/2004 

Page 6 of 22 

•

  Attach VCon IGC server T1 link to NSU, DSU or Embedded PRI card 

o

  Configure hardware for Line Termination through jumpers or DIP 

switch – please refer to the Technician’s Handbook of the correct 
product (3300 or SX2000) 

•

  connect to server with a straight through cable 

•

  Program trunks 

o

  for example, please see Example of T1/D4 Programming on 3300 

or SX2000 

•

  Test link to server by dialing <feature access code for individual trunk 

access> <trunk number><any 4 digit number>< # > e.g. 
<**2><6101><1000><#> 

o

  You should hear “Welcome to Remoteability” 

•

  Program ARS so a single four digit number accesses the IGC system 

o

  Program trunk group 

o

  Add trunks to trunk group 

o

  Create Digit Modification Assignment ** see following note 

o

  Create Route Assignment 

o

  Create ARS Digits Dialed Assignment 

o

  Please see Example of ARS Programming on 3300 or SX2000 

 
**Note:  The Dialogic card in the IGC server is expecting ANI on the T1D4 
trunk, but the 3300 or SX2000 does not deliver ANI over T1D4.  This will 
result in a 10 to 15 second delay in accessing the IGC after the trunk 
access number is dialed.  To correct this, send an ANI digit string to the 
trunk through the Digit Modification Form.  See below. 
 

Digit Modification Assignment 

 

Digit 
Modification 
Number 

     

Number of 
Digits to 
Absorb 

     

Digits to be 
Inserted 

     

Final Tone 
Plan/Information 
Marker 

     

                               

 1 

 

3 

 

 

 

 

 

                               

 2 

 

0 

 

 

 

 

 

                               

 3 

 

1 

 

<T01> 

 

 

 

                               

 4 

 

0 

 

**6135922122**  

 

 

                               

 
 
 

 
Public Network Access via DPNSS    

 

Yes