Mobi Technologies MOBICAM 70060 ユーザーズマニュアル

•  Always remember that you are using public airways when using 

your monitor. 

•  Use only a dry cotton cloth to keep the Camera and Monitor units 

free of dust. Do not use a dampened cloth, water, or liquid cleaner 

of any kind.

                  

•  Always remove batteries from the Camera and Monitor and 

unplug the AC adaptors from wall outlets during long periods of 

non-use.

•  Replace only with the same or equivalent type. Please dispose of 

old, defective batteries in an environmentally friendly manner in 

accordance with the relevant legislation.

Use the volume and ON/OFF switch on the side of the unit to turn 

on the unit (7).

Press the Channel Selection Switch (3) on the Monitor to choose 

which channel you want the unit to transmit on. The channel 

indicator LED (2) will illuminate which channel the Monitor is set to 

(A or B).

NOTE: If your picture continues to switch between channel A and B, 

your Automatic Channel Scan is activated. Press the Channel 

Selection Switch (3) on the monitor until the feature turns off. 

 

Selecting this option allows the Monitor to scan between both 

channels automatically, stopping at each for about 5 seconds. This 

feature enables you to monitor two cameras at the same time. 

Press the Channel Switching Button until the LED light (5) is turned 

on. 

The brightness of the LCD can be adjusted by the 2 Brightness 

Control buttons on the side of the Monitor unit (11). Press the (+) 

to increase and (-) to decrease the brightness of the LCD.

9 

 

 

 

 

 

 

 

 

 

 

6