Intel esm-2850 2047285001r ユーザーズマニュアル

ページ / 91
User’s Manual 
ESM-2850 User’s Manual 
 
47
 
3.5.2.2  Hard Disk Boot Priority 
This item allows you to select the Hard Disk device boot up priority. 
Item 
Description 
Pri./Sec. 
Master/Slave 
Boot up from IDE Primary/Secondary Master/Slave Hard Disk 
USBHDD 
0/1/2 
Boot up from 1st/2nd/3rd USB Hard Disk 
Bootable 
Add-in Cards 
Boot up from other Add-In Card Hard Disk Device. 
3.5.2.3 Virus 
Warning 
Allows you to choose the VIRUS Warning feature for IDE Hard Disk boot sector protection. 
If this function is enabled and someone attempt to write data into this area, BIOS will show 
a warning message on screen and alarm beep. 
Item 
Description 
Enabled 
Activates automatically when the system boots up causing a warning message to 
appear when anything attempts to access the boot sector or hard disk partition table.
Disabled 
No warning message will appear when anything attempts to access the boot sector or 
hard disk partition table. 
3.5.2.4  CPU L1 & L2 & L3 Cache 
The item allows you to speed up memory access. However, it depends on CPU design.
 
Item 
Description 
Enabled Enable 
cache 
Disabled Disable 
cache 
3.5.2.5  Quick Power On Self Test 
This category speeds up Power On Self Test (POST) after you power up the computer. If it 
is set to Enable, BIOS will shorten or skip some check items during POST. 
Item 
Description 
Enabled 
Enable quick POST 
Disabled Normal 
POST 
3.5.2.6 First/Second/Third/Other Boot Device 
The BIOS attempts to load the operating system from the devices in the sequence selected 
in these items. 
Item 
Description 
Floppy Floppy 
Device 
LS120 LS120 
Device 
Hard Disk 
Hard Disk Device 
CDROM CDROM 
Device 
ZIP100 ZIP-100 
Device 
USB-FDD 
USB Floppy Device 
USB-ZIP 
USB ZIP Device 
USB-CDROM 
USB CDROM Device 
LAN Network 
Device 
Disabled 
Disabled any boot device