Metra Electronics 99-7877s ユーザーズマニュアル
99-7877S KIT ASSEMBLY
5
DOUBLE DIN RADIO PROVISION/
Cut and remove the center bar from
the radio housing. (Figure A)
the radio housing. (Figure A)
2
Snap the Double DIN brackets to the
inside edge of the Radio Housing.
(Figure B)
inside edge of the Radio Housing.
(Figure B)
3
Slide the Double DIN head unit or
stacked ISO head units into the
bracket/radio housing assembly and
secure the Double DIN head unit or
stacked ISO head units to the
assembly using the screws supplied
with the radio. (Figure C)
stacked ISO head units into the
bracket/radio housing assembly and
secure the Double DIN head unit or
stacked ISO head units to the
assembly using the screws supplied
with the radio. (Figure C)
4
Snap the Double DIN trim plate onto
the front of the radio/housing
assembly. (Figure C)
the front of the radio/housing
assembly. (Figure C)
5
*
Note: Refer also to the instructions included with the aftermarket radio.
STACKED ISO MOUNT UNITS PROVISION
A
B
C
Locate the factory wiring harness in
the dash. Metra recommends using
the proper mating adapter from Metra
or AXXESS. Re-connect the negative
battery terminal and test the unit for
proper operation.
the dash. Metra recommends using
the proper mating adapter from Metra
or AXXESS. Re-connect the negative
battery terminal and test the unit for
proper operation.
1
Re-assemble dash in reverse order of
disassembly.
disassembly.
6