Metra Electronics 99-7877s ユーザーズマニュアル
99-7877S KIT ASSEMBLY
3
A
B
C
DIN MOUNT RADIO PROVISION WITH POCKET
Locate the factory wiring harness in
the dash. Metra recommends using
the proper mating adapter from
Metra or AXXESS. Re-connect the
negative battery terminal and test
the unit for proper operation.
the dash. Metra recommends using
the proper mating adapter from
Metra or AXXESS. Re-connect the
negative battery terminal and test
the unit for proper operation.
1
Slide the DIN cage into the Radio
Housing and secure by bending the
metal locking tabs down. (Figure A)
Housing and secure by bending the
metal locking tabs down. (Figure A)
2
Slide the aftermarket head unit into
the cage and secure. (Figure B)
the cage and secure. (Figure B)
3
Snap the pocket into the Radio
Housing. (Figure C)
Housing. (Figure C)
4
Re-assemble dash in reverse order of
disassembly.
disassembly.
5
*
Note: Refer also to the instructions included with the aftermarket radio.