Garmin 190-00556-10 ユーザーズマニュアル

C

USTOMIZING

 Y

OUR

 Q

UEST

> 

C

USTOMIZING

 

THE

 O

VERALL

 S

YSTEM

 S

ETUP

You can customize various system setup features on your Quest. 

Press MENU two times, highlight System Setup, and press OK. 
GPS Mode—sets GPS to Normal, WAAS, Battery Saver (which 

periodically turns off the GPS receiver to save battery power), or 

GPS Off. See “Understanding GPS” beginning on 

more information.
Voice Guidance—determines when the Quest “speaks.” 

•  Automatic with Chime: The unit chimes and then speaks 

status messages and guidance messages during route 

navigation. For each turn on a route, the voice gives 

instructions three times: after you have completed a turn, as 

you are approaching the next new turn, and just before you 

reach the next turn. 

•  Automatic: The unit speaks guidance messages during route 

navigation, as described above. It does not give chimes.

• 

 Button Only: The unit only speaks when the Speak key 

is pressed.

External Power Lost—if Turn Off is set, the unit shuts down 

after 30 seconds when the Quest loses external power. If Stay On 

is set, the Quest runs on battery power when external power is lost.

Text Language—changes all on-screen text to the selected 

language. Changing the text language does not affect the display of 

map data or user-entered data. Map data is always displayed in the 

language in which it is stored in the map.
Voice Language—(Quest 2 Only) changes the spoken language. 

Keypress Tone—turns the keypress beep On or Off. 
Safe Mode—turns the Safe Mode on and off. When your vehicle 

is moving, Safe Mode disables all Quest functions that require 

significant operator attention and could distract the driver. When 

you come to a complete stop, these features are automatically 

enabled. Set to Off to allow a passenger to operate the unit. 
To restore these settings, press the 

MENU key, highlight Restore 

Settings, and press OK.