Garmin 190-00556-10 ユーザーズマニュアル

C

USTOMIZING

 Y

OUR

 Q

UEST

> 

C

USTOMIZING

 

THE

 U

NITS

 

AND

 T

IME

 S

ETTINGS

Press MENU two times, highlight Units Setup, and press OK.
Distance and Speed—allows you to change the units used to 

measure distance. Statute shows speed in miles per hour and 

elevation in feet. Metric shows speed in kilometers per hour and 

elevation in meters. 
Heading Display—displays your direction of travel in cardinal 

letters, degrees, or mils.
Location Format—allows you to select from a variety of formats. 

Use the default setting if you are unfamiliar with location formats.
Heading—allows you to select a heading. True shows true north 

headings and Magnetic automatically calculates the magnetic 

variation for the geographical area. User allows you to input a 

magnetic variation in the Magnetic Variance field. Grid provides 

a true north heading as determined by the Location Format. 
Vertical Speed—displays vertical speed in feet/minute, meters/

minute, or meters/second.
Elevation—displays elevation in feet or meters.
Datum—allows you to select from over 100 different map datums 

to match almost any paper map or chart. Use the default setting if 

you are unfamiliar with map datums.

To restore these settings, press the 

MENU key, highlight Restore 

Settings, and press OK.

Press MENU two times, highlight Time Setup, and press OK.
Time Format—displays time in a 12- or 24-hour format, or UTC. 
Time Zone—allows you to select a time zone from the list. If 

your time zone is not on the 

list, select Other to manually 

enter the UTC Offset. If you 

are not certain what the offset is 

between UTC and the local time 

zone, enter incremental offset 

values until the correct local time 

appears. As you move west of the 

Prime Meridian  

(0° longitude) the offset is negative (-), and as you move east the 

offset is positive (+). 
Daylight Savings—allows you to turn on (Yes), off (No), or set to 

Automatic (Auto) if it is available.
To restore these settings, press the 

MENU key, highlight Restore 

Settings, and press OK.