Mitsubishi Electronics colorview xd480u ユーザーズマニュアル

EN - 22

You can display your desired image as the startup 
screen (or splash screen). Using the menu, you can also 
use such image as a background that is displayed while 
the video is muted or no signal is supplied.

Important:
•  You can't set IMAGE CAPTURE when PASSWORD 

FUNCTION in the FEATURE menu has been set to 
SPLASH ID SCREEN to enable the password lock. 

Setting procedure 
1.  Press the COMPUTER button to select the image 

supplied to the COMPUTER/COMPONENT VIDEO 
IN terminal.

2.  Display your desired image.

3.  Display the INSTALLATION menu.

4.  Select IMAGE CAPTURE by pressing the 

 or  

button.

5.  Press the ENTER button.

•  The setting menu will be displayed.

Set the background color
(Set the background color only when you set the image 
size to x1 or x2.)
6.  Select BACK COLOR by pressing the 

 or  but-

ton.

7.  Select your desired color for the background (GRAY, 

RED, GREEN, BLUE, BLACK, WHITE, RED50%, 
GREEN50%, or  BLUE50%) by pressing the 

 or  

button. 

Set the image size
8.  Select SIZE by pressing the 

 or  button.

9.  Select x1, x2, or FULL by pressing the 

 or  but-

ton.

Capture the image
10. Select CAPTURE by pressing the 

 or  button.

11. Press the ENTER button.

•  A red frame appears.  (The size of the red frame 

is 295x222 pixels.)

12. Adjust the size of the image to be captured so that 

such image stays within the red frame. 
• Press 

the 

, ,  or  button to move the red 

frame.

•  You can't move the red frame outside the screen. 

13. Press the ENTER button twice.

•  Image capture will start.

•  Press the MENU button to cancel the procedure.
•  When the image capture completes, the captured 

image will be displayed for 2 seconds. 

Important:
• You 

can

't change the new startup screen back to the 

original startup screen.  (Even when you select RE-
SET ALL in the FEATURE menu, the factory default 
screen isn't available any longer.)  When you want 
to change the startup screen again, capture another 
image.

•  The captured image will be displayed from the next 

startup.  If the captured image isn

't displayed, make 

sure that the setting of SPLASH SCREEN in the IN-
STALLATION menu isn't OFF.  (See page 17.)

•  To display the captured image while the video is 

muted, set MUTE MODE in the INSTALLATION menu 
to IMAGE.  (See page 17.)

•  When BACK COLOR in the INSTALLATION menu is 

set to IMAGE, the captured image will be displayed 
while no signal is supplied.  

•  Some images can't be captured correctly because 

of their signal type.  

x1

x2

FULL