Q-Logic 8200 ユーザーズマニュアル
2–Configuring NIC
NIC Partitioning (NPAR)
SN0054671-00 B
2-61
Configure NPAR
You can use the NIC Partition Management tab in the device properties page to
enable NPAR and configure the 10GbE physical port into a multi-function storage
and networking port.
enable NPAR and configure the 10GbE physical port into a multi-function storage
and networking port.
To set up NPAR on an 8200 and 3200 Series Adapters’ port:
1.
Log in to the server that contains installed 8200 and 3200 Series Adapters.
2.
Open the Server Manager and select Diagnostics > Device Manager >
Network Adapters.
Network Adapters.
3.
Right-click the first QLogic 10 Gigabit Ethernet CNA device and select
Properties from the context menu (
Properties from the context menu (
Figure 2-39. Selecting Properties from the Context Menu
4.
From the Adapter Properties page, do the following:
a.
Select the NIC Partition Management tab.
b.
Right-click the function number you want to enable.