honda-power-equipment hht31s ユーザーズマニュアル

A variety of blades are available from your Honda 
trimmer servicing dealer. Always use a debris 
shield designed for use with a blade when 
attaching a blade to your trimmer. The blade type 
debris shield does not have a cutoff knife.

Honda HHT31SUNBA trimmers are supplied with 
a blade cover surrounding the edge of the blade. 
For safety, and to protect the blade, the cover 
should be installed whenever the trimmer is not in 
use.

If installing a metal blade on a Honda trimmer 
equipped with a loop handle, also install the 
optional barrier kit that includes a full shoulder 
harness, a barrier bar, and a debris shield for 
metal blades. Follow the installation instructions 
and safety information that comes with the kit.

Grass/Weed Blades
Grass/weed blades, which may be plastic or 
metal, are used as an alternative to nylon 
monofilament line for cutting grass and ordinary 
weeds.

However, blades should never be used for edging 
against solid surfaces.

Weed/Brush Blades
These metal blades have chisel-shaped teeth 
that are used for cutting through field grass, thick 
weeds, and light brush. They are not designed for 
sawing woody material. The teeth must be sharp 
for good results.

Brush/Wood Blades
These metal saw-tooth blades are used for 
sawing through saplings, shrubs and woody 
brush. The teeth must be sharp for good results. 
Brush/wood blades will also cut grass and 
weeds, but they are not efficient for that purpose.