honda-power-equipment hht31s ユーザーズマニュアル

Brush/Wood Blade Cover Installation and 
Removal  
1. Install the blade cover over the blade so half 

the blade is covered.
To prevent the post end from interfering with 
the debris shield, pull the post end away from 
the blade and set it on top of the blade as 
shown.
Turn the blade cover slowly until the post end 
clears the debris shield.

2. Reposition the post end over the blade.
3. With the blade cover fully seated on the 

blade, latch the tab over the post.

Remove the blade cover in the reverse order of 
installation.

Your Honda trimmer servicing dealer has cutting attachments that have been designed and approved 
for your trimmer and are covered by warranty. Non-Honda attachments are usually designed for 
universal applications. Although aftermarket attachments may fit on your trimmer, they may not meet 
factory specifications and could make your trimmer unsafe.