OKI network 7120e ユーザーズマニュアル

OkiLAN 7120e Network User’s Guide

61

If an incorrect IP Address, Subnet Mask or Gateway is entered, the 
network may go down or other damage may occur.  Check the address 
with the network manager.
The following example uses HP-UX10.20 and a ML8810 printer as 
examples. The absolute path and method of configuring commands may 
differ in other versions of the OS. Refer to the workstation manual for more 
details.

1. Confirm that the IP address of the printer has been set. See 

network interface card IP address configuration for more 

information.

2. Login as [root] to the workstation. If you do not have 

superuser rights, the network manager should conduct the 

configuration.

3. Register the IP Address of the network card and the host 

name in the /etc/hosts file. 

192.168.20.127 ML8810

4. Use the ping command to confirm connection with the 

network card.

# ping ML8810

If there is no reply, there is a problem with the configuration of the IP 
address (the IP address has already been set manually or dynamically), or 
with the network. Reset the network interface card settings to default and 
try to set a temporary IP address. If you still have the problem after 
resetting the network interface card, consult the network manager.

5. If remote spooling is not already enabled on the HP-UX 

machine, carry out the following configuration.

a. Stop the printer spooler.

# /usr/sbin/lpshut

b. Add the following line to the /etc/inetd.conf file and register the 

remote spooler.

printer stream tcp nowait root /usr/sbin/rlpdameon –I