OKI network 7120e ユーザーズマニュアル

OkiLAN 7120e Network User’s Guide

63

The following explanation uses AIX4.1.5 and a ML8810 printer as 
examples. The absolute path of commands and the method of configuring 
may differ with the OS version. Refer to the workstation’s manual. If an 
incorrect IP address is entered, the network may go down or other damage 
may occur. Configure after consulting the network manager.

1. Log in as [root]. If you do not have superuser rights, the 

network manager should conduct the configuration.

2. Register the IP address and the host name in the /etc/hosts 

file.

192.168.20.127 ML8810

3. Use the ping command to confirm connection with the 

network card.

# ping ML8810

If there is no reply, there is a problem with the configuration of the IP 
address (the IP address has already been set manually or dynamically), or 
with the network. Reset the network interface card settings to default and 
try to set a temporary IP address. If you still have the problem after 
resetting, consult the network manager.

4. Register the host that was previously registered as the print 

server.

a. Add the print server.

# ruser –a –p ML8810

b. Activate the remote printer daemon.

# startsrc –s lpd

 

# mkitab ‘lpd:2:once:startsrc –s lpd’

5. Add the print queue using the smit command.

a. Activate the smit command and convert to the item [Add print 

queue].