honda-power-equipment hrs216sda ユーザーズマニュアル

3

1. Loosen the two locking knobs on the lower handlebar enough to 

raise the handlebar into the mowing position. 

2. Depress the blade control lever while raising the handlebar

3. Tighten the locking knobs securely.

The mower is shipped WITHOUT 
OIL in the engine. Remove the oil 
filler cap/dipstick and add the entire 
contents of the included bottle of oil 
into the oil filler opening.

All Honda engines are run at the 
factory prior to packaging. Most of 
the oil is removed prior to shipment; 
however, some oil remains in the 
engine. The amount of oil left in the engine varies.

If you don’t use the supplied oil, add enough SAE 10W-30 API service 
category SJ or later oil to bring the oil level between the upper and 
lower limit marks on the dipstick—without screwing the dipstick in 
(approximately 12 to 13.5 ounces is required). See 

Do not overfill the engine with oil. If the engine is overfilled, the 
excess oil may get transferred to the air cleaner housing and air filter. 
An indication of overfilling is white or blue smoke coming from the 
muffler when the engine is running.

After filling the engine with oil, screw the filler/cap dipstick in and 
remove the hang tag near the recoil starter grip that says “The engine 
has no oil.”

Please take a few minutes and register your purchase with Honda. 

You can register by completing and mailing the registration card on 
the back cover of this book or going online to 

http://powerequipment.honda.com

 and clicking on Product 

Registration.

Before using the lawn mower, all mower operators must read the 
following sections:

• FOR YOUR SAFETY (

• BEFORE EACH OPERATION (

)

• OPERATION (

)

• MAINTENANCE SCHEDULE (