Vertex Standard FT-2000 ユーザーズマニュアル

Page 112

FT-2000 O

PERATING

ANUAL

AGC G

ROUP

001 AGc FST DLY

Function: Sets the delay time for the AGC FAST mode of
the Main band (VFO-A) receiver.
Available Values: 20 ~ 4000 msec (20 msec/step)
Default Setting: 300 msec

002 AGc FST HLD

Function: Sets the hang time of the AGC peak voltage for
the AGC FAST mode of the Main band (VFO-A) receiver.
Available Values: 0 ~ 2000 msec (20 msec/step)
Default Setting: 0 msec

003 AGc MID DLY

Function: Sets the delay time for the AGC MID mode of
the Main band (VFO-A) receiver.
Available Values: 20 ~ 4000 msec (20 msec/step)
Default Setting: 700 msec

004 AGc MID HLD

Function: Sets the hang time of the AGC peak voltage for
the AGC MID mode of the Main band (VFO-A) receiver.
Available Values: 0 ~ 2000 msec (20 msec/step)
Default Setting: 0 msec

005 AGc SLW DLY

Function: Sets the delay time for the AGC SLOW mode of
the Main band (VFO-A) receiver.
Available Values: 20 ~ 4000 msec (20 msec/step)
Default Setting: 2000 msec

006 AGc SLW HLD

Function: Sets the hang time of the AGC peak voltage for
the AGC SLOW mode of the Main band (VFO-A) receiver.
Available Values: 0 ~ 2000 msec (20 msec/step)
Default Setting: 0 msec

DISPLAY G

ROUP

007 diSP COLOR

Function: Selects the Display color when the optional Data
Management Unit (DMU-2000) is connected.
Available Values: bL1/bL2/bL3/ub1/ub2

bL1: COOL BLUE
bL2: CONTRAST BLUE
bL3: FLASH WHITE
ub1: CONTRAST UMBER
ub2: UMBER

Default Setting: bL1 (COOL BLUE)
A

DVICE

If the optional DMU-2000 Data Management Unit is not
connected, this adjustment has no effect.

008 diSP DIM MTR

Function: Setting of the meter brightness level when
“DIM” is selected.
Available Values: 0 ~ 15
Default Setting: 4

009 diSP DIM VFD

Function: Setting of the frequency display brightness level
when “DIM” is selected.
Available Values: 0 ~ 15
Default Setting: 8

010 diSP BAR SEL

Function: Selects one of three parameters to be viewed
on the Tuning Offset Indicator.
Available Values: CLAr/C-tn/u-tn
Default Setting: C-tn

CLAr: Displays relative clarifier offset.
C-tu: Displays relative tuning offset between the in-

coming signal and transmitted frequency.

u-tn:

Displays the peak position of the VRF or µ-
TUNE filter.

OTE

The µ-TUNE filter is an option.

011 diSP PK HLD

Function: Selects the peak hold time of the Sub (VFO-B)
receiver’s S-meter.
Available Values: OFF/0.5/1.0/2.0 sec
Default Setting: OFF

012 diSP RTR STU

Function: Selects the starting point of your rotator
controller’s indicator needle.
Available Values: 0/90/180/270 °
Default Setting: 0 °

013 diSP RTR ADJ

Function: Adjusts the indicator needle precisely to the
starting point set in menu item “012 diSP RTR STU.”
Available Values: –30 ~ 0
Default Setting: 0

ENU

ODE