Vertex Standard FT-2000 ユーザーズマニュアル

Page 123

FT-2000 O

PERATING

 M

ANUAL

110 SCP 14.0 FI

Function: Selects the scan start frequency of the FIX mode
Spectrum Scope while monitoring on the 20 m amateur
band.
Available Values: (1)4.000 - (1)4.349 MHz (1 kHz/step)
Default Setting: (1)4.000 MHz

111 SCP 18.0 FI

Function: Selects the scan start frequency of the FIX mode
Spectrum Scope while monitoring on the 17 m amateur
band.
Available Values: (1)8.000 - (1)8.199 MHz (1 kHz/step)
Default Setting: (1)8.068 MHz

112 SCP 21.0 FI

Function: Selects the scan start frequency of the FIX mode
Spectrum Scope while monitoring on the 15 m amateur
band.
Available Values: (2)1.000 - (2)1.449 MHz (1 kHz/step)
Default Setting: (2)1.000 MHz

113 SCP 24.8 FI

Function: Selects the scan start frequency of the FIX mode
Spectrum Scope while monitoring on the 12 m amateur
band.
Available Values: (2)4.800 - (2)4.989 MHz (1 kHz/step)
Default Setting: (2)4.890 MHz

114 SCP 28.0 FI

Function: Selects the scan start frequency of the FIX mode
Spectrum Scope while monitoring on the 10 m amateur
band.
Available Values: (2)8.000 - (2)9.699 MHz (1 kHz/step)
Default Setting: (2)8.000 MHz

115 SCP 50.0 FI

Function: Selects the scan start frequency of the FIX mode
Spectrum Scope while monitoring on the 6 m amateur band.
Available Values: (5)0.000 - (5)3.999 MHz (1 kHz/step)
Default Setting: (5)0.000 MHz

M

ENU

 M

ODE

TUNING G

ROUP

116 tun DIALSTEP

Function: Setting of the Main Tuning Dial knob’s tuning
speed on the SSB, CW, and AM modes.
Available Values: 1 or 10 Hz
Default Setting: 10 Hz

117 tun CW FINE

Function: Enabling/disabling of the “Fine” tuning speed
in the CW mode.
Available Values: EnA (ENABLE) / diS (DISABLE)
Default Setting: diS (DISABLE)

EnA (ENABLE): Tuning in 1 Hz steps on the CW

mode.

diS (DISABLE): Tuning according to the steps deter-

mined via menu item “116 tun
DIALSTEP.”

118 tun MHz SEL

Function: Selects the tuning steps for the [SUB VFO-B]
knob when the [MHz] button is pressed.
Available Values: 1/0.1 MHz
Default Setting: 1 MHz

119 tun AM STEP

Function: Selects the tuning steps for the microphone’s
[UP]/[DWN] keys in the AM mode.
Available Values: 2.5/5/9/10/12.5 kHz
Default Setting: 5 kHz

120 tun FM STEP

Function: Selects the tuning steps for the microphone’s
[UP]/[DWN] keys in the FM mode.
Available Values: 5/6.25/10/12.5/25 kHz
Default Setting: 5 kHz

121 tun FM DIAL

Function: Setting of the Main Tuning Dial knob’s tuning
speed in the FM mode.
Available Values: 10/100 Hz per step
Default Setting: 100 Hz per step

122 tun MY BAND

Function: Programs a band to be skipped while selecting
bands using the [SUB VFO-B] knob.
Available Values: 1.8 ~ 50/GE/AU
Default Setting: ---
To program the band to be skipped, rotate the [SUB VFO-
B] knob to recall the band to be skipped while selecting
bands via the [SUB VFO-B] knob, then press the [ENT]
button to change this setting to “ON” (a “d” notation will
replace the “E” notation). Repeat the same procedures to
cancel the setting (skipped “Off”: “d” notation appears).

SCOPE G

ROUP