Honeywell equip hd3mdihx ユーザーズマニュアル
HD3MDIH/X EQUIP Series Indoor High Resolution True Day/Night IP Dome Camera User Guide
Document 800-07361 Rev A
53
12/10
Figure 4-9
Video Codec Settings
Compression
Ratio
Ratio
Minimum, Low,
Medium, High,
Maximum
Medium, High,
Maximum
When Quality is selected as the Priority, select the Compression Ratio.
Minimum is the highest visual quality; Maximum is the lowest visual quality.
Minimum is the highest visual quality; Maximum is the lowest visual quality.
Target Bit
Rate (kbps)
Rate (kbps)
250 – 6000 kbps Enter the Target Bit Rate in kbps (kilobits per second) which represents the
amount of data processed per second.
GOP (No. of
Frames)
Frames)
1– 50
Select the GOP (Group of pictures) number from 1 to 50. (Not available on the
Secondary Stream.)
Secondary Stream.)
Table 4-4
Compression Settings(cont’d)
Setting
Options
Description
Select this Priority
field setting
field setting
Field Setting
Description
Quality
Maximum Bit Rate
The Target Bit Rate field
is grayed out.
The Target Bit Rate field
is grayed out.
If the actual bit rate (use statistics to determine)
from the camera momentarily exceeds the
maximum bit rate (MBR), the camera will maintain
the actual frames per second.
from the camera momentarily exceeds the
maximum bit rate (MBR), the camera will maintain
the actual frames per second.
Bit Rate
Target Bit Rate and
Maximum Bit Rate
Maximum Bit Rate and
Compression Ratio fields
are grayed out.
Maximum Bit Rate
Maximum Bit Rate and
Compression Ratio fields
are grayed out.
Set the target bit rate accordingly. If the actual bit
rate (use statistics to determine) from the camera
momentarily exceeds the target rate, the camera
will maintain target bit rate by adjusting the image
quality, and then reducing the actual frames per
second if necessary.
rate (use statistics to determine) from the camera
momentarily exceeds the target rate, the camera
will maintain target bit rate by adjusting the image
quality, and then reducing the actual frames per
second if necessary.
Statistics are received
for the current image in
real time when
Received is enabled.
for the current image in
real time when
Received is enabled.
Set the Resolution for
NTSC or PAL video signals.
NTSC or PAL video signals.