Uniden UBCT9 ユーザーズマニュアル

Start Remote Mode and Change Transfer Speed:

1.   Press and hold RMT for 2 seconds to activate the Remote
 

mode.

2.   Select the transfer speed except for 

, then press E and

 

the scanner will start Remote mode.

A unique feature of the UBCT9 is that all the front panel keys on the radio remain 
operational in Remote mode.

For your information:
 

Transfer speed   : 9600/19200/38400/57600 bps (adjustable)

 

Start/Stop bit  

: 1 bit, 1 bit

 

Data Length   

: 8 bit

 

Parity Check  

: None

 

Code           

: ASCII code

 

Flow Control  

: None

 

Return Code  

: Carriage Return only

You will need to purchase a RS232C straight cable and a null modem adapter. RS232C 
straight cables are available as male to male or male to female. Even if the RS232C 
straight cable you buy already has the male to male connectors, you will still have to have 
the null modem adapter. On the next page you will see the pin connections that are internal 
to a standard device. (These items are available at your local electronics stores.)

UBCT9 OM   49

12/11/07   3:54:02 PM