Namco Bandai Games 90500094 ユーザーズマニュアル
Page 18
5-1 Assembling the Machine
1.
Remove 4off Security Screws (M5x16) and remove the Clamp Bracket Vac-Form
from the front of the monitor cabinet.
from the front of the monitor cabinet.
2.
Remove the 4off Hex Head Screws (M10x20), Spring Washers and Flat
Washers.
Washers.
Note: Do not loose the Vac-Form or screws as they are needed for refitting.
3.
Remove 4off Hex Head Screws (M10x20), Spring Washers and Flat Washers
and remove the Ski Pole Clamp Bracket from the Shipping Bracket.
Note: Do not loose the Bracket or screws as they are needed for refitting.
and remove the Ski Pole Clamp Bracket from the Shipping Bracket.
Note: Do not loose the Bracket or screws as they are needed for refitting.
4.
Remove 2off Hex Head Screws (M10x20), Spring Washers and Flat Washers
and remove the Shipping Bracket from the Step Base.
5.
Connect the 2 connectors between the Step Base and Monitor Base and push
the two bases together, taking care not to trap any wires.
the two bases together, taking care not to trap any wires.
6.
Fit the Joint Brackets using the 8off Hex Head Screws (M10x25), Spring Washers
and Flat Washers. (4off screws each side)
and Flat Washers. (4off screws each side)