Namco Bandai Games 90500094 ユーザーズマニュアル
Page 20
5-2 Fitting the Header Assembly
The Header Assembly has a forward centre of gravity, so it is important that at
least two people are used to fit or remove the Header Assembly.
least two people are used to fit or remove the Header Assembly.
The fitting position of the Header Assembly is high and it is important that a means of
reaching the height safely, without stretching, is available. (e.g. steps, step stools etc)
reaching the height safely, without stretching, is available. (e.g. steps, step stools etc)
1.
Remove the two security screws
(M5x12) and remove the
Connector Cover.
(M5x12) and remove the
Connector Cover.
2.
Place the Header Assembly on to the monitor cabinet, slide
the header back ensuring that it engages fully in to the
retaining brackets at the front of the monitor cabinet.
the header back ensuring that it engages fully in to the
retaining brackets at the front of the monitor cabinet.
3.
Fit the two security head
screws (M5x12) to retain the
Header Assembly to the
cabinet.
screws (M5x12) to retain the
Header Assembly to the
cabinet.
4.
Connect the connector
and refit the connector
cover using the two
security screws
(M5x12).
and refit the connector
cover using the two
security screws
(M5x12).