Nautilus t516 ユーザーズマニュアル

1

4-7  Reinstall the elevation potentiometer (see Figure 

4) - taking note of the flat spot on the shaft of the 
pot in relation to the flat spot on the cam inside the 
elevation motor (see Figure 5). 

NOTE:  Do not force the elevation pot. It should 

mate up with little or no pressure. 

4-8  Reconnect the elevation cable to the 

potentiometer making sure that the colors on the 
two wires match up. 

4-9  Replace the motor cover first, then replace the 

lower outer plastics using (4) Phillips head screws 
per side. Replace the lower inside upright plastic 
covers using (4) Phillips head screws, per side. 

NOTE:  Be sure that all wires are secure and out 

of the way of any moving parts during 
reassembly. 

4-10 Recalibrate the treadmill (see Appendix 4).