Konica Minolta pi5500 ver2 pcl um ユーザーズマニュアル

Installing the Printer Driver

Pi5500

2-7

The printer driver requires setting of items that are common to all print 
jobs, including the port to which the printer cable is connected and any 
optional devices configured with the machine. These settings must be 
made using property sheets available from the Properties command after 
the printer driver has been installed, or whenever the operating 
environment changes.

The most common settings were made when the printer driver was 
installed, meaning that you do not usually need to change them. Some 
items must, however, be changed in the following cases.

l

You want to add a comment to distinguish the printer 
from others

“General”

l

The computer’s connecting port has been changed

l

You want to change the conditions for the display of 
a timeout error

l

You want to designate a port to which the machine is 
connected via a network (this setting must be made 
on a computer that is connected to the controller via 
a network)

“Details”

l

This setting is not related to printing.

“Color Management”

l

You want to share the machine with other computers 
connected to the same network (this setting must be 
made on the computer directly connected to the 
controller)

“Sharing”

l

You want to change the setting in the “Minolta 
Pi5500ver2 PCL6 Properties” dialog box.
For details, see Chapter 3.

“32-bit Super Driver Setup”