Konica Minolta pi5500 ver2 pcl um ユーザーズマニュアル
Installing the Printer Driver
2
Pi5500
2-9
Displaying a Property Sheet from an Application Menu
1
Select [Print...] from the [File] menu of the application.
2
Make sure that the “Name” of the “Printer” is “Minolta Pi5500ver2
PCL6”: If “Minolta Pi5500ver2 PCL6” is not listed, click [
PCL6”: If “Minolta Pi5500ver2 PCL6” is not listed, click [
Ä
] and, from
the menu that will then appear, select “Minolta Pi5500ver2 PCL6.”
3
Click the [Properties] button. This shows the property sheet.
This method allows you to set the number of copies and paper for each
document.
document.
Note that the settings made on the property sheet accessed through the
application are valid only for that particular application.
application are valid only for that particular application.
TIPS
To set the Device Options Setting, which need not be changed unless
device is changed, open from the printer folder to set.
To set the Device Options Setting, which need not be changed unless
device is changed, open from the printer folder to set.
To show a property sheet other than Setup, click the corresponding
tab located on the top part of the screen.
tab located on the top part of the screen.
NOTE
è
The steps to display a property sheet may be different depending on
the application. Follow the correct procedure according to the
application. The procedure above is based on the application
WordPad.
the application. Follow the correct procedure according to the
application. The procedure above is based on the application
WordPad.