Konica Minolta pi5500 ver2 pcl um ユーザーズマニュアル
Troubleshooting
5
Pi5500
5-3
5.2
Unable to Make Correct Settings / to Print Exactly
as Set
as Set
Perform the troubleshooting procedures given below in the order listed
when you cannot make proper settings in the printer driver or when the
print results do not represent what has been set.
when you cannot make proper settings in the printer driver or when the
print results do not represent what has been set.
Symptom
Possible Cause
Action
Unable to select an item in
the printer driver.
the printer driver.
Some functions cannot be
combined.
combined.
Do not select items which
are dimmed.
are dimmed.
The “Conflicts” dialog box is
displayed on the computer
screen.
displayed on the computer
screen.
An illegal combination of
functions has been made.
functions has been made.
Check for combination and
make a correct combination
of functions.
make a correct combination
of functions.
Unable to print exactly as
set.
set.
Incorrect settings are made.
Check the setting for each
item of the printer driver.
item of the printer driver.
The combination of
functions, though valid on
the printer driver, is invalid
on the machine.
functions, though valid on
the printer driver, is invalid
on the machine.
The watermark cannot be
printed.
printed.
The watermark was not
correctly set.
correctly set.
Check the watermark
setting.
setting.
The “Shading” setting of the
watermark is low.
watermark is low.
Check the “Shading” setting
of the watermark.
of the watermark.
Unable to specify Staple.
Staple can be specified only
when the type of Finisher
you are using is selected on
the “Device Options Setting”
property sheet, and “Auto” is
selected for “Output
Setting” on the “Setup”
property sheet.
when the type of Finisher
you are using is selected on
the “Device Options Setting”
property sheet, and “Auto” is
selected for “Output
Setting” on the “Setup”
property sheet.
Select the type of Finisher
you are using on the “Device
Options Setting” property
sheet, and select “Auto” for
“Output Setting” on the
“Setup” property sheet.
you are using on the “Device
Options Setting” property
sheet, and select “Auto” for
“Output Setting” on the
“Setup” property sheet.
Unable to specify Staple.
No stapling can be effected
in the following cascs:
Paper size of 11×14, A6, B6,
FLS or Custome Size is
specified, exit port other
than “Auto” is selected, OHP
Interleaving is specified.
in the following cascs:
Paper size of 11×14, A6, B6,
FLS or Custome Size is
specified, exit port other
than “Auto” is selected, OHP
Interleaving is specified.