Fujitsu esx ユーザーズマニュアル

Chapter 6  Setting Up the VMware ESX Server
  6.2  Setting Up for VMware Infrastructure 3

ETERNUS DX Disk storage systems User’s Guide -Server Connection- (iSCSI) for VMware® ESX

Copyright 2012 FUJITSU LIMITED

P3AM-3412-11ENZ0

9

Confirm that the IP address for the iSCSI port of the ETERNUS DX Disk storage 
system is displayed as follows and click [Close].

10

If the connected ETERNUS DX Disk storage system uses multiple iSCSI ports, 
repeat the IP address addition process for each iSCSI port. (Repeat 

through 

.)

6.2.5

Setting the CHAP Authentication

For VMware ESX connections, the ETERNUS DX Disk storage system uses a one-way CHAP 
authentication to authenticate the Software Initiator access.
Perform the following settings to enable CHAP authentication.

1

Select the [Configuration] tab on VMware Infrastructure Client and select 
[Storage Adapters].

2

Select the target iSCSI Software Adapter and click [Properties].

3

Select the [CHAP Authentication] tab and click [Configure].

4

Select the [Use the following CHAP credentials] radio button.

5

Set arbitrary user name during the CHAP authentication.