Creative AWE64 ユーザーズマニュアル
Setting Up Your Audio Card 1-5
6. Align your card’s 16-bit slot
connector with the expansion
slot and gently lower the card
into the free slot as shown.
slot and gently lower the card
into the free slot as shown.
7. Secure the card to the
expansion slot with the screw
that you removed from the
metal plate.
that you removed from the
metal plate.
8. Connect powered speakers or an external amplifier to the Line
Out jacks. Figure 1-5 shows you how to connect various
devices.
devices.
The joystick connector on your audio card is identical to that on
a standard PC game control adapter or game I/O connector.
You can connect any analog joystick with a 15-pin D-shell
connector. It also works well with any application that is
compatible with the standard PC joystick. To use two
joysticks, you need a Y-cable splitter.
a standard PC game control adapter or game I/O connector.
You can connect any analog joystick with a 15-pin D-shell
connector. It also works well with any application that is
compatible with the standard PC joystick. To use two
joysticks, you need a Y-cable splitter.
9. Replace your system’s cover.
10. Plug the power cord back into the wall outlet. Switch on the
system.
Figure 1-4
Audio card
Metal plates
16-bit slot
8-bit slot
Figure 1-5: Connecting external speakers and other devices.
CD-ROM drive
To PC power
supply
supply
CD Audio
connector
CD Audio
cable
cable
Audio card
Line In
Mic In
Line Out Left
Joystick/MIDI
Gamepad
Speakers
Microphone
Cassette and CD player,
synthesizer, etc.
Line-out
Separate metal bracket
SPDIF Out
Line Out Right
red
Left
Right
External Digital
Device
Line-In
L R
L R
SPDIF
connector
white